Master of Science Program in Earthquake Engineering consists of a minimum 24 credit hour course load and a Master of Science Thesis. Of the minimum number of 24 credits, at least one third should be comprised of required courses specified by the program to which the student is registered.The remaining two third may be chosen from elective courses of the program or the courses acceptable by regulations of the institute, subject to the approval of student advisor. The 24 credits of course work is normally made up to 500 and 600 level courses; however, with the approval of the advisor, some of the program may be composed of 400 level courses, maximum two of them with credit, not taken the students undergraduate program.
Upon completion of course work with a grade-point average of at least 3.00, the student is required to carry out supervised research and complete a Master's thesis in at most two successive semesters.The student has an oral examination after the thesis is submitted for approval.
- COMPULSORY COURSES -
CE 503Mathematical Methods in EngineeringI EQE 520Strong Ground Motion EQE 530Earthquake Response Analysis of Structures -I EQE 540Site Response Analysis EQE 550Earthquake Resistant Design
- ELECTIVE COURSES-
EQE 510Earthquake Physics and Hazard EQE 594Selected Topics in Earthquake Engineering -II EQE 595Selected Topics in Earthquake Engineering-I EQE 620Earthquake Wave Propagation EQE 630Earthquake Response Analysis of Structures -II EQE 650Experimental Methods in Earthquake Engineering EQE 677Simulation of Strong Ground Motion EQE 678Earthquake Resistant Design of Reinforced Concrete Bridges EQE 679Seismic Microzonation Methodologies EQE 682Special Studies in Earthquake Engineering-I EQE 695Special Topics in Earthquake Engineering -II EQE 696Special Topics in Earthquake Engineering -I EQE 690M.Sc Thesis
Graduate level courses from the departments of Civil, Mechanical, Electrical Engineering and Geophysics on the subjects of : Soil Mechanics; Finite Elements; Theory of Elasticity; Digital Signal Analysis; and Seismology can be considered as elective courses subject to the approval of the advisor.
- COURSE LIST AND CONTENTS - EQE 400 Introduction to Earthquake Engineering
Earthquake and ground motion.Vibration of structures under ground motion methods of seismic analysis (codes).Behaviour of building structures under earthquake loading. Introduction to earthquake resistant design of various civil engineering structures.
Prerequisite:Consent of the Instructor.
EQE 510 Earthquake Physics and Hazards
Theory of plate tectonics, plate tectonic and seismo-tectonic models for Eastern Mediterranean region and Anatolia. Seismic source regionalization. Faulting, ground deformations, subsidence and landslides during earthquakes. Reservoir induced seismicity. Site selection procedures for engineering structures.
EQE 520 Strong Ground Motion
Physics of earthquakes. Seismicity. Seismic waves. Attenuation. Spatial, temporal and frequency domain characteristics and components of ground motion and procedures for their estimation. Strong motion instrumentation. Analysis and interpretation of strong motion data. Fourier, power and response spectrum. Deterministic and probabilistic assessment of the seismic hazard.
EQE 530Earthquake Response Analysis of Structures -I
Free vibration and linear earthquake response analysis of single-degree-of-fredom (SDOF) systems, extension to generalized SDOF systems, equivalent seismic load and response spectrum concepts.Three-dimensişonal free-vibration and linear earthquake response analaysis of multi-degree-of-freedom(MDOF) systems, mode-superposition method, spectral analysis techniques.
EQE 540 Site Response Analysis
Earthquake wave propagation in linear and non-linear soil media. Introduction to one and two dimensional plane-strain site response analysis. Kinematics of soil-structure interaction during earthquakes and foundation impedance functions. Seismic soil forces on deep foundations, retaining walls and harbor structures. Soil-pile interaction during earthquakes.
EQE 550 Earthquake Resistant Design
Strength supply and ductility demand concepts. Nonlinear earthquake response of single-degree-of-freedom (SDOF) systems with different hysteretic models. Development and use of constant-ductility response spectra.Theoretical background to Turkish Earthquake Resistant Design Code. Capacity Design principle, strength and ductility requirements for reinforced concrete and steel structures.
Prerequisite: EQE530
EQE 594 Selected Topics in Earthquake Engineering - I
Selected topics in the graduate program will be covered to suit individual interests of the students. These courses are aimed at providing an opportunity for advanced research.
EQE 595 Selected Topics in Earthquake Engineering - II
Selected topics in the graduate program will be covered to suit individual interests of the students. These courses are aimed at providing an opportunity for advanced research.
EQE 620 Earthquake Wave Propagation
Waves in infinite media: dilatational, distortional and plane waves. Waves generated by body forces. Simple SH wave sources. Harmonic waves from cylindrical and spherical cavities. Waves in half space. Reflection and refraction. Surface waves. Waves in layered media. Transfer functions. Scattering and diffraction. Attenuation.
Prerequisite: Consent of the Instructor.
EQE 630 Earthquake Response Analysis of Structures- II
Essentials of performance-based seismic evaluation and design. Evaluation of strength-based and displacement- based seismic analysis and design methodologies. Theoretical backround to inelastic seismic capacity (pushover) analysis. Development and use of constant- strength response spectra. Estimation of seismic demand and acceptance criteria at structural member level.
Prerequisite: EQE530 EQE 650 Experimental Methods in Earthquake Engineering
Dynamic response measurement techniques. Ambient vibration surveys for structural dynamics and micro-regionalization. Forced vibration surveys. System identification. Shaking table tests.
Prerequisite: Consent of the Instructor.
EQE 677 Simulation of Strong Ground Motion
Earthquake source models (seismic moment and stress parameters, Brune's source model, near field models, Haskell's model, complex source models). Time domain characteristics of strong ground motion (root-mean-square ground accelleration, duration, time domain envelope). Frequency domain characteristics of strong ground motion. Radiation pattern and directivity. Simulation of strong ground motion (stochastic simulations for point source, stochastic simulations for finite fault rupture, deterministic models, empirical Green's function method, hybrid simulation methods).
Prerequisite: Consent of the Instructor.
EQE 678 Earthquke Resistant Design of Reinforced Concrete Bridges
Earthquake resistant design philosophy; preliminary design; structural modeling; analysis; design; use of isolation and energy dissipation devices in design. Assessment of earthquake resistance of existing bridges. Retrofit principles and design.
Prerequisite: EQE550
EQE 679 Seismic Microzonation Methodologies
Cyclic behavior of soils; site response analysis; liquefaction; simple method of microzonation; zonation with respect to site amplification; zonation for liquefaction; zonation for slope stability.
EQE 682 Special Studies in Earthquake Engineering
pecial topics associated with the recent developments on the theory and applications of Earthquake Engineering. Subjects are updated from semester to semester.
This semester:Introduction to Stochastic Analysis of Structural Vibrations
Instructor: Prof. Dr. Erdal Safak
EQE 695 Special Topics in Earthquake Engineering - I
Special topics associated with the recent developments on the theory and applications of Earthquake Engineering. Subjects are updated from semester to semester.
This semester:Nonlinear Structural Analysis
Instructor: Dr. Sami And Kılıç
EQE 696 Special Topics in Earthquake Engineering - II
Special topics associated with the recent developments on the theory and applications of Earthquake Engineering. Subjects are updated from semester to semester.
This semester:Passive Structural Control
Instructor: Prof. Dr. Mustafa Erdik